Planning to build a new asphalt driveway in Ringwood or the surrounding eastern suburbs?
All Ash has been laying asphalt driveways across Greater Melbourne since 2011. We work across Ringwood, Ringwood East, Ringwood North, Heathmont, Croydon, and Bayswater — and we bring the same full in-house crew and equipment to every job, no matter the size.
Building a driveway right means doing the groundwork properly before a single tonne of asphalt goes down. That starts with a free on-site assessment — not a guess over the phone. We inspect the slope, drainage, soil, access, and existing surface so you get a quote based on what your property actually needs, not a generic rate per square metre.
Why asphalt for your Ringwood driveway?
Asphalt is one of the most cost-effective and durable driveway surfaces available in Melbourne’s eastern suburbs. It handles everyday traffic well, drains efficiently when installed with the correct fall, and can be resurfaced rather than fully replaced if the base remains sound. When the base preparation and compaction are done properly, an asphalt driveway delivers long-term value and a clean, modern finish that holds up to the Ringwood climate — wet winters included.
What we do in Ringwood and surrounds
All Ash manages the full scope of driveway construction in-house. You won’t be dealing with subcontractors or hired equipment. Our team handles:
- New asphalt driveway construction
- Driveway resurfacing and overlays
- Pothole and asphalt repairs
- Site preparation and excavation
- Base construction to suit the site
- Drainage solutions
- Brick and alternative driveway edging
- Retaining walls where required
We use a 3-tonne multi-tyre roller on every residential job. Proper compaction at this stage is one of the biggest factors in long-term driveway performance — and it is something that gets cut on cheaper jobs.
Driveway services for Ringwood properties
New driveway construction
Building from scratch? We construct new asphalt driveways for homes, townhouses, dual occupancies, and accessways across Ringwood and the eastern suburbs. Full excavation, base preparation, and asphalt laying — all done by our own crew with our own equipment.
Driveway resurfacing
If your existing driveway is structurally sound but worn at the surface, resurfacing can restore it at a lower cost than full replacement. We assess the base before recommending either option — we won’t push a full rebuild if resurfacing is the right call for your situation.
Pothole and asphalt repairs
Small areas of damage worsen quickly once water gets into the surface. We carry out pothole repairs and localised asphalt patching to extend the life of your driveway and prevent a small problem from becoming a costly one.
Edging, drainage, and retaining walls
The details define the result. Proper drainage keeps water off the surface and out of the base. Quality edging locks the perimeter and lifts the finish. Where your block has level changes or unstable ground, we can advise on and construct the right retaining solution.
Every job in Ringwood gets the same attention regardless of size. All Ash was built on owner-involved delivery — the people who quote your job are connected to the people who build it. That is how we keep quality consistent across every project we take on.
How we build a driveway in Ringwood
The surface you drive on is the last thing we lay. Everything that happens before that determines how long it lasts. Here is how we approach every new driveway construction in Ringwood and the surrounding eastern suburbs.
1. Free on-site assessment and quote
We visit your property to inspect the site in person before putting a number on anything. We look at access for machinery, the fall of the land, the existing surface or ground conditions, trees, and how you plan to use the driveway. That gives us what we need to quote accurately — and design a driveway that performs for the long term.
2. Slope, drainage, and site assessment
Ringwood properties vary significantly in terrain. Elevated blocks, tight access, and poorly draining ground are all common in the area and all require specific design decisions before construction begins. We factor these in early so the finished driveway sheds water correctly and holds its structure over time.
3. Excavation and site preparation
The existing surface — whether it is cracked asphalt, concrete, gravel, or bare ground — is removed or reshaped as needed. We carry out all excavation with our own equipment. Proper preparation at this stage is what prevents movement, cracking, and edge failure down the track.
4. Base construction
The base carries the load. We determine the correct depth and material based on the site conditions, vehicle use, and traffic frequency for your property. A well-constructed base distributes weight evenly and is the foundation that protects your asphalt surface from cracking under pressure or movement.
5. Edging and drainage
Where required, we install edging to define the driveway perimeter and support the asphalt edges. Drainage is addressed to ensure water moves away from the surface rather than sitting on it or travelling under it. These elements protect both the driveway and the surrounding property.
6. Asphalt laying and compaction
Hot-mix asphalt is machine-laid and then compacted using a 3-tonne multi-tyre roller. This step determines the density and durability of the finished surface. Proper compaction produces a tighter, more uniform finish — one that is harder-wearing, cleaner in appearance, and more resistant to surface wear over time.
7. Clean-up and handover
Once the work is done, we clean up the site and walk you through curing time, when you can drive on the new surface, and how to get the best performance from your driveway long term. You should know what to expect from day one.
FREQUENTLY ASKED QUESTIONS
How much does it cost to build an asphalt driveway in Ringwood?
The cost of a new asphalt driveway in Ringwood depends on the size of the area, how much preparation the site requires, drainage needs, edging preferences, and whether any existing surface needs to be removed first. Because every property is different, we provide free on-site quotes rather than fixed rates per square metre. Contact All Ash to arrange a site visit and quote for your property.
How long does a new asphalt driveway last?
A properly built asphalt driveway can last 20 years or more. Longevity depends on the quality of the base, correct drainage, appropriate compaction at the time of laying, traffic load, and routine maintenance. Cutting corners on base preparation or compaction is where most early failures originate.
Do you service Ringwood East, Ringwood North, and surrounding suburbs?
Yes. All Ash services Ringwood and the broader eastern suburbs including Ringwood East, Ringwood North, Heathmont, Croydon, Bayswater, Mitcham, and surrounds. Contact us to confirm coverage for your location.
Is asphalt or concrete better for a driveway in the eastern suburbs?
Both are viable options. Asphalt is generally more cost-effective upfront, can be resurfaced without full replacement, and is more flexible in cold conditions — which matters in Melbourne winters. Concrete is harder and has a different aesthetic. All Ash specialises in asphalt. If you are undecided, we are happy to discuss the pros and cons for your specific site during the on-site assessment.
Why do you need to visit the site before quoting?
No two properties are the same. The slope of the land, how water currently moves across the site, access for our machinery, soil conditions, existing surfaces, nearby trees, and how the driveway will be used all affect the right design and the actual cost. A quote given without a site visit is unlikely to reflect the real scope of work.
Can you replace an existing concrete or gravel driveway with asphalt?
Yes. We can remove and dispose of existing concrete, gravel, or old asphalt surfaces and construct a new asphalt driveway in its place. The on-site assessment will determine whether any additional base preparation is required once the existing surface is removed.
Get a free on-site quote in Ringwood
Ready to build a new asphalt driveway in Ringwood, or replacing one that has had its day? Contact All Ash to arrange a site inspection and free quote. No obligation, no phone estimate — we come to you.
CONTACT US FOR A QUOTEThe All Ash difference
Owner-involved delivery
The owners of All Ash are involved in projects from start to finish. You are not dealing with a company that wins the work and sends a subcontractor. The people who quote your driveway are connected to the people who build it.
Full in-house fleet
We own and operate our own equipment — including 8ft and 6ft asphalt pavers, multi-tyre rollers, skidsteers, bobcats, and a dedicated priming division. No hired machinery means faster scheduling and lower costs passed through to you.
25+ years of experience
All Ash has been operating since 2011 with a team that carries over 25 years of collective asphalt industry experience. We have built driveways, carparks, sports courts, and roads across Melbourne and regional Victoria.
Free on-site quotes
We do not quote over the phone. Every quote starts with a site visit so we can assess slope, drainage, soil, access, and vehicle use before recommending a solution. That is how we avoid surprises for both parties.
End-to-end scope
Drainage, base prep, edging, retaining walls, and asphalt laying are all handled by our team. You won’t need to coordinate multiple contractors to get one driveway finished properly.
Proven track record
All Ash has worked alongside major contractors including Bild Group, Downer EDI, Ace Contractors, and SJ Higgins, as well as local councils and VicRoads-connected projects across Victoria.
Ringwood homeowners deserve a driveway built to last — not the cheapest quote that looks fine on day one and starts failing by year three. All Ash takes the job seriously from the first site visit to the final roller pass. Contact us to get started.
